Install like the Pros! T-Lock™ Tile Leveling System ensures you can be relaxed with your tile installation knowing everything will be completely levelled.
Ensure your first tile project remains lippage free, everytime, without any breakages in the process.
Each tile is levelled by all the tiles around it. The clips will keep your tile level and flush, preventing tiles from warping as the thin-set (mortar) cures.
The Perfect Level Master system allows you to lay tiles straight and even on both floors and walls.
Our Wedges have a Lifetime Warranty and are made from a highly durable plastic. The T-Lock Wedge has a unique thumb pattern to ensure comfort and eliminate fatigue throughout the installation process.
Design & Technology: The T-Lock Wedge is the only wedge to have a built-in spacer in the tip, making it the only multi-use wedge on the market. The T-Lock Wedge is also reusable, helping to reduce waste.
Usage: The T-Lock Wedge slides securely into the T-Lock Clip, creating the perfect amount of tension to create a levelled surface.
The T-Lock Crosses are designed to not only be reusable, but allow for use in different tile installation patterns such as brick pattern or stacked. The T-Lock Crosses are available in 1mm, 2mm, and 3mm variants.
Design & Technology: The T-Lock Crosses are designed to avoid falling between any gaps, creating neater, more consistent grout lines throughout the entire installation process.
Usage: The T-Lock Crosses help maintain grout joint spacing and protect tile corners.
No, you can always use a smaller grout size clip and use our Tile Crosses to make up the difference. By using this trick you can reuse more of your material and it offers the installer greater flexibility.
This may be because the breaking off of the clips is not done parallel to the grout line. One should always strike the sides of the clips with a rubber mallet or safety shoes parallel to the grout line. Another possibility is the the tile work was left to dry with excess adhesive on the tile edges. This can be avoided by cleaning the edges with a putty knife when the adhesive is still fresh.